Categories
Configuration
Power supply
Standard
Power supply
Standard
Choose variant
Range
Interface
Wariant
Interface
Price
-
from
to
IoT modules
Devices that connect equipment to the network and let you control it remotely: LAN input/output modules, Ethernet to RS232/RS485 converters, analogue signal transmitters with Ethernet and remote control over the internet from Papouch and Inveo.
Need to integrate a device with your monitoring or building system? Tell us about your project.
EDGAR - Ethernet to RS232 or RS485 converter with PoE
- Function: Ethernet to RS232 or RS485 conversion
- Power: PoE 802.3af or external 11–58 V DC power supply
- VOUT output: power for the connected device
- Communication: also via HTTP GET, TCP and UDP
Availability: Available
Dispatched within: 3 working days
Lantick PE-1-1 — 1-Input, 1-Output Module Controlled via LAN
- Power: PoE IEEE 802.3af or DC 10-24V, power consumption 1.5W
- Number of inputs: 1, normally open (NO) type
- Number of outputs: 1, relay NO type
- Maximum relay operating voltage: 30V DC
- Maximum load current: 1A
- Operating modes: bistable, astable, one-shot
- Communication: LAN, 10Mbps Ethernet port, RJ45
- Dimensions: 74.6 x 50.1 x 27.0 mm
Availability: Available
Dispatched within: 3 working days
Nano In — Compact Input Control Module via LAN
- Power: Passive PoE 10-24V DC, PoE adapter included, power consumption 1.5W
- Number of inputs: 1
- Input type: dry contact, NO
- Maximum input frequency: 1000 Hz
- Maximum counter value: 4,294,967,296
- Communication: LAN, 10Mbps Ethernet port, RJ45
- Protocols: HTTP GET, Modbus TCP, SNMP, MQTT, TCP, UDP
Availability: Available
Dispatched within: 3 working days
Nano Out — Compact Single-Output Control Module via LAN
- Power: Passive PoE 12-24V DC, PoE adapter included, power consumption 1.5W
- Number of outputs: 1
- Output type: NO relay
- Maximum operating voltage: 30V DC
- Maximum load current: 1A
- Operating modes: bistable, astable, monostable
- Communication: LAN, 10Mbps Ethernet port, RJ45
- Protocols: HTTP GET, Modbus TCP, SNMP, MQTT, TCP, UDP
Availability: Available
Dispatched within: 3 working days
LAN-RS485 media converter — RS485 to Ethernet Network Gateway
- Power: Passive PoE 12-24VDC or 12-24VDC screw terminal
- Communication: LAN and RS-485
- Housing: DIN rail mounting
- Configuration: built-in web page
- Firmware update: TFTP
- Connection modes: Client TCP-Server TCP, Client UDP-Server UDP, UDP Multicast
- Protocol: Modbus (compatible)
Availability: Available
Dispatched within: 3 working days
Lantick PE-4-4 — LAN Input/Output Module for Automation and Monitoring
- Power: Passive PoE 10-24V DC or DC 10-24V, max. power consumption 4.2W
- Number of inputs: 4, optocoupler type, input voltage 10-24V
- Number of outputs: 4, NO relay
- Maximum output operating voltage: 250V AC, current 2A per channel
- Operating modes: bistable, astable, monostable, blinds
- Communication: LAN, 10Mbps Ethernet port, RJ45
- Protocols: HTTP GET, Modbus TCP, SNMP, KNX/IP, TCP, UDP
- Housing: IP30, DIN rail mounting, dimensions 104.8 x 90 x 65 mm
Availability: Available
Dispatched within: 3 working days
Quido Duplex RS - transmission of two-state signals over RS485/RS232 (4 channels)
- Function: a kit of two devices for transmitting two-state signals over RS485 (only two wires) or RS232
- Operating principle: applying voltage or closing a contact on one module activates a relay on the other module
Availability: Available
Dispatched within: 3 working days
