Categories
Configuration
Power supply
Standard
Power supply
Standard
Choose variant
Range
Interface
Wariant
Interface
Price
-
from
to
Ethernet-RS232 converter - Papouch Gnome (isolated version)
- Ethernet-RS232 Conversion: Bidirectional conversion between 10/100 Ethernet and RS232.
- Virtual Serial Port: Software that creates a serial port in Windows.
- Configuration via Web Interface: Easy configuration and management.
- Power Supply Range: 4.5 to 75V, support for various protocols, including TCP/IP and UDP.
Availability: Available
Dispatched within: 3 working days
GNOME232 - Ethernet to RS232 converter (standard power supply)
- Function: Ethernet to RS232 serial port conversion
- Power: 5–30 V DC, without galvanic isolation
- Signals: RXD, TXD, RTS, CTS, DTR, GND
- TruPort: remote control of speed, parity and other serial port parameters via the NVT protocol
Availability: Available
Dispatched within: 3 working days
GNOME422 - Ethernet to RS422 converter (without galvanic isolation)
- Function: Ethernet to RS422 bus conversion
- Applications: connecting an RS422 device to a LAN, extending a line or building an RS422 network over Ethernet
- Power: 5–30 V DC
- Signals: Rx+, Rx-, Tx+, Tx-
Availability: Available
Dispatched within: 3 working days
GNOME485 - Ethernet to RS485 converter (without galvanic isolation)
- Function: Ethernet to RS485 bus conversion
- Applications: connecting an RS485 device to a LAN or extending an RS485 line over Ethernet
- Power: 5–30 V DC, without galvanic isolation
- Signals: RxTx+, RxTx- (A, B)
- Additionally: optional virtual serial port
Availability: Available
Dispatched within: 3 working days
GNOME485 Ethernet-RS485 converter (isolated version)
- Ethernet-RS485 Conversion: Allows easy connection of an RS485 device to Ethernet.
- Virtual COM Port: Software that creates a new serial port in Windows.
- Galvanic Isolation: Yes
- Protocol Support: TCP/IP and UDP support for broad compatibility.
Availability: Available
Dispatched within: 3 working days
iBoot IO – Smart Power Switch
- Fast on/off switching of external devices based on alerts or monitored conditions.
- Compatible with Room Alert monitors and Relay Switch sensors.
- No need to modify the power cord of the connected device.
- Automatic power management for AC devices up to 12A at 105-125VAC.
Availability: no stock
IQIO PRO — Advanced Monitoring Controller with Wi-Fi or LAN
- Power: PoE IEEE 802.3af (option), DC 12-24V or USB C 5V, power consumption 1.5W
- Bus: 3-wire cable or flat RJ12 cable with adapter, up to 6 sensors
- Input: 1 digital, pre-biased, normally open
- Output: 1 NO relay, max 30V DC, max 1A
- Communication: Ethernet 10/100Mbps RJ45 (option) or Wi-Fi
- Protocols: HTTP(s), MQTT(s), Modbus TCP, SNMP v2c/v3
Availability: Available
Dispatched within: 3 working days
