Categories
Vendor
Configuration
Price
-
from
to
CO2: Monitor Indoor Carbon Dioxide Levels
Our advanced CO2 sensors will allow you to monitor indoor carbon dioxide levels. In the medical, office, or other public spaces, air quality control is essential.
Carbon Dioxide (CO2) Concentration Sensor
- High measurement accuracy: 0 to 2000 ppm with minimal error.
- Advanced technology: NDIR sensor with gold-plated optics.
- Fast response time: Responds to changes in the environment within 3 minutes.
- Easy installation: Designed for use with Papago TH CO2 ETH and Papago Meteo ETH/WiFi/RS.
Availability: Available
Dispatched within: 3 working days
PAPAGO TH CO2 ETH - CO2, temperature, humidity and dew point measurement with Ethernet
- Function: measurement of CO2 concentration, temperature, humidity and dew point
- Inputs: one or two sensors simultaneously
- Power: PoE or external power supply
- CO2 range: 0 to 2000 ppm, accuracy ±25 ppm (NDIR optical sensor)
- Temperature range (combined sensor): -40 to +125°C
- Humidity range: 0 to 100%
- Temperature range (separate sensor): -55 to +125°C
Availability: Available
Dispatched within: 3 working days
THCO2 - CO2 sensor, thermometer and hygrometer with RS485
- Function: CO2 concentration, temperature and humidity sensor
- Temperature range: -40 to +70°C
- CO2 range: 0 to 10,000 ppm
- Interface: RS485
- Protocols: Modbus RTU or Spinel
- Software: Modbus Configurator for switching the protocol and parameters
Availability: Available
Dispatched within: 3 working days
CO2 concentration sensor, 3 m cable
- Function: carbon dioxide concentration sensor with excellent accuracy
- Cable: 3 m long
- Sensor type: NDIR, indoor version
- Compatibility: PAPAGO TH CO2 ETH and PAPAGO Meteo ETH/WiFi/RS
- Measuring range: 0 to 5000 ppm
- Measuring method: optical NDIR sensor (non-dispersive infrared sensor)
- Accuracy 400-1000 ppm: ±50 ppm, ±2.5% of the measured value
- Accuracy 1001-2000 ppm: ±50 ppm, ±3.0% of the measured value
Availability: Available
Dispatched within: 3 working days
WebSensor CO2-H-T — CO2 Sensor with Temperature and Humidity Measurement
- Gas detector used: SCD30
- Measured parameters: CO2 concentration, temperature, humidity
- Compatibility: Virtus, Daxi
- Communication: RJ12 bus connector, screw bus terminal (three-wire cable)
- Cable type: flat, three-wire or no cable — your choice
- Cable length: 1 meter, 5 meters or 10 meters
Availability: Available
Dispatched within: 3 working days
WebSensor CO2HT — 3-wire cable, 1 m — CO2 Concentration Sensor for Virtus/Daxi
- Function: CO2 concentration sensor
- Communication: 2x RJ12 bus connectors or a detachable connector (three-wire cable)
- Power: powered from the bus of the master device (Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor)
- Cable: 3-wire, length 1 m
- Compatibility: Inveo modules: Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor (depending on the version)
Availability: Available
Dispatched within: 3 working days
WebSensor CO2HT — 3-wire cable, 10 m — CO2 Concentration Sensor for Virtus/Daxi
- Function: CO2 concentration sensor
- Communication: 2x RJ12 bus connectors or a detachable connector (three-wire cable)
- Power: powered from the bus of the master device (Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor)
- Cable: 3-wire, length 10 m
- Compatibility: Inveo modules: Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor (depending on the version)
Availability: Available
Dispatched within: 3 working days
