Categories
Vendor
Choose variant
Price
-
from
to
NANO IN Input status monitoring via LAN
Miniature module for remote monitoring of input status by web. Input state, is shown on the website.
Availability: Dostępny
Dispatched within: 3 working days
QuidoDuplex RS: Extender of digital I/Os, RS485
QuidoDuplex RS is a set of two I/O modules for RS485 line (two wires only) with a special firmware designed specificaly to transmit digital I/Os over RS485 line as an autonomous system - no PCs or PLCs needed.
Availability: Dostępny
Dispatched within: 3 working days
DA2ETH: DA converter with two voltage or current outputs with Ethernet
DA2ETH is a universal converter with analog output used for control and regulation. Two independent analog outputs can be either voltage or current.
Availability: Dostępny
Dispatched within: 3 working days
DA2RS: DA converter with two voltage or current outputs with RS232/RS485
DA2RS is a universal converter with analog output used for control and regulation.
Availability: Dostępny
Dispatched within: 3 working days
I/O module QuidoDuplex Ethernet 4/4
- I/O module set for Ethernet Ethernet (LAN, computer network)
- Special firmware
- No PC required
Availability: Dostępny
Dispatched within: 3 working days
LANTICK PE-0-16 Smart digital inputs module via LAN
A device enables to control 16 dry contact / wet contact 12-24VDC inputs.
Built-in switch that allows you to connect additional LAN modules.
The device enables to control a LAN relay (Lantick with outputs or Nano Out) as a remote relay extension.
Availability: Dostępny
Dispatched within: 3 working days
LANTICK PE-16-0 smart module of 16 transistor digital outputs.
Lantick PE-0-16 is a smart module of 16 opto-isolated dry contact and 10-24VDC wet contact inputs. Input status is available via LAN. Additionally, the inputs status change can be transmited to the server or to another module in M2M communication. The inputs are NO (normally open) type, however the software allows to change the type to NC (normally closed). In addition, the inputs can operate in pulse counting mode.
Availability: Dostępny
Dispatched within: 3 working days
LANTICK PRO PE-0-1
LanTick PE-0-1 - a small-sized module with a dry contact input, its status is available via the LAN network.
The device enables to control a LAN relay (Lantick with outputs or Nano Out) as a remote relay extension.
Input pulses counting function.
Various LAN communication protocols supported.
Availability: Dostępny
Dispatched within: 3 working days
Papago TH 2DI DO WiFi: Environment monitor
PAPAGO TH 2DI DO is used as an environment monitor – it measures temperature, humidity and dew point. It also has two contact inputs to connect either contact or a pulse output and a relay.
Availability: Dostępny
Dispatched within: 3 working days
Quido ETH 0/2: 2 outputs and thermometer
Quido ETH 0/2 includes 2 outputs and thermometer. Quido connects directly to a LAN (Ethernet) and can be fully controlled and managed through a web interface.
Availability: Dostępny
Dispatched within: 3 working days