Lantick PE-4-4 — LAN Input/Output Module for Automation and Monitoring

Lantick PE-4-4 is an input/output control module from the Lantick series, designed to simultaneously monitor four inputs and control four relay outputs over a LAN. Its robust DIN rail design and sealed IP30 housing ensure reliable operation in industrial and building installations.

The module supports a wide range of communication protocols — HTTP, Modbus TCP, SNMP, TCP, UDP and KNX/IP in Routing mode — so it can easily be integrated with building management systems (BMS), alarm installations and monitoring platforms. The built-in web server lets you configure the device remotely and view input/output states from any browser.

The device can be powered in two ways: via Passive PoE 10-24V DC or directly through a DC 10-24V screw terminal, which makes it easier to plan the installation according to the available infrastructure.

Key information

Main features:

• Inputs: 4 optocoupler inputs, input voltage 10-24V, maximum frequency 1000 Hz

• Outputs: 4 NO relay outputs, max. 250V AC at 2A per channel

• Response time: switch-on 1ms, switch-off 5ms, time resolution 100ms

• Operating modes: bistable, astable, monostable (single trigger) and blinds mode

• Communication: LAN, 10Mbps Ethernet port RJ45

• Protocols: HTTP GET, Modbus TCP, SNMP, KNX/IP in Routing mode, TCP, UDP, control from the Windows/Linux command line, Inveo Dashboard service

• Connectors: screw terminals for quick installation

• Housing: IP30, dimensions 104.8 x 90 x 65 mm, DIN rail mounting

Applications

Lantick PE-4-4 is ideal wherever remote control of inputs and outputs over a LAN is needed: in building management systems, alarm installations, industrial automation and facility monitoring systems.

See also the EnviSensor and CE MonitorApp solutions from Chip Electronics — if you are looking for a ready-made system for central monitoring of multiple measurement points.