Lantick PE-8-0 — 8 Relay Output Module Controlled via LAN
Regular price:
Regular price:
product unavailable
Lantick PE-8-0 — 8 Relay Output Module Controlled via LAN
Lantick PE-8-0 is an output control module from the Lantick series, designed for remote control of eight relay outputs over an Ethernet network. Its robust design ensures reliability, and the easy-to-use web interface simplifies configuration and everyday use.
The module supports a wide set of communication protocols — HTTP, Modbus TCP, SNMP, TCP, UDP and KNX/IP — so it integrates with building management systems, alarm installations and monitoring platforms. The built-in web server lets you control and configure the device remotely from a web browser.
Power is supplied via Passive PoE 10-24V DC or directly through a DC 10-24V screw terminal, which gives you flexibility when planning the installation.
Key information
Power
Passive PoE / DC 10-24V
Number of outputs
8 (NO relay)
Max. voltage / current
250V AC / 2A per channel
Communication
LAN Ethernet 10Mbps, RJ45
Operating modes
bistable, astable, blinds
Example application
building automation, blind control
Main features:
Outputs: 8 NO relay outputs, max. 250V AC at 2A per channel
Response time: switch-on 1ms, switch-off 5ms, time resolution 100ms
Operating modes: bistable, astable, monostable (single trigger) and blinds mode
Communication: LAN, 10Mbps Ethernet port RJ45
Protocols: HTTP GET, Modbus TCP, SNMP, KNX/IP in Routing mode, TCP, UDP, control from the Windows/Linux command line, Inveo Dashboard service
Connectors: screw terminals
Power: Passive PoE 10-24V DC or DC 10-24V, max. power consumption 4.2W
Applications
Lantick PE-8-0 is well suited to building management systems, lighting and blind control, industrial automation and alarm installations where remote control of multiple output circuits over a LAN is required.
See also EnviSensor and CE MonitorApp from Chip Electronics if, in addition to controlling outputs, you need a complete environmental monitoring system.