Power supply
Standard
Choose variant
Variant
Standard
Price
-
from
to
Smart Control via Internet - Your Devices, Your Command
Smart control via the Internet represents the future of device management. With this solution, you can remotely monitor and manage various aspects of your environment. Whether it's lighting, air conditioning, or security systems, you have complete control at your fingertips.
NANO IN Input status monitoring via LAN
Miniature module for remote monitoring of input status by web. Input state, is shown on the website.
Availability: Dostępny
Dispatched within: 3 working days
NANO IN Input status monitoring via LAN
Miniature module for remote monitoring of input status by web. Input state, is shown on the website.
Availability: Dostępny
Dispatched within: 3 working days
LANTICK PE-4-4 ,4 inputs and 4 outpus controlled by LAN
- Power Supply: 10-24VDC via a 3.5mm screw terminal, 10-24VDC Passive PoE via LAN adapter, power consumption approximately 4.5W.
- Communication: 1 Ethernet port 1x10Mbps.
- Inputs: 4 opto-isolated digital inputs, input voltage: 10-24VDC, maximum counter value: 4,294,967,296, maximum input frequency: 1000Hz.
- Outputs: 4 NO relay outputs, maximum voltage: 250VAC, maximum load current: 2A per channel, relay operating modes: astable (alternating on/off), bistable, single trigger.
- Communication Protocols: Built-in WWW page, KNX/IP protocol, HTTP protocol, Inveo Dashboard access service, M2M, SNMP protocol, Modbus TCP protocol, Windows command line program, Linux command line program, Android phone/tablet.
Availability: Dostępny
Dispatched within: 3 working days
QuidoDuplex RS: Extender of digital I/Os, RS485
QuidoDuplex RS is a set of two I/O modules for RS485 line (two wires only) with a special firmware designed specificaly to transmit digital I/Os over RS485 line as an autonomous system - no PCs or PLCs needed.
Availability: Dostępny
Dispatched within: 3 working days
Miniature module LanTick Pro PE-1-0, one relay output, LAN control
Controlling devices via the Internet – LanTick Pro PE-1-0. Miniature module has one relay output NO, by means of which it is possible to control devices via the LAN.
Availability: Dostępny
Dispatched within: 3 working days
LAN/RS485 Nano Analog Input converter
Analog input converter LAN/RS485
Availability: Dostępny
Dispatched within: 3 working days
RFID USB Pocket – pendrive RFID
RFID USB Pocket is an RFID card reader in the form of a pendrive. It enables to read read unique tags.
The device can work in the following modes:
- keyboard emulation,
- virtual serial port (COM port).
Availability: Dostępny
Dispatched within: 3 working days
Cronos - universal time controller, programming year-round cycle, built-in astronomical clock, 8 relay outputs.
CRONOS module is used to control electrical circuits in time in programmed by the user's way. Enable or disable may be dependent on sunrise or sunset. The controller calculates the times of sunrise and sunset based on the entered coordinates.
Availability: Dostępny
Dispatched within: 3 working days
DA2ETH: DA converter with two voltage or current outputs with Ethernet
DA2ETH is a universal converter with analog output used for control and regulation. Two independent analog outputs can be either voltage or current.
Availability: Dostępny
Dispatched within: 3 working days