Categories
Configuration
Power supply
Power supply
Standard
Choose variant
Variant
Standard
Interface
Wariant
Interface
Price
-
from
to
I/O module QuidoDuplex Ethernet 4/4
- I/O module set for Ethernet Ethernet (LAN, computer network)
- Special firmware
- No PC required
Availability: Available
Dispatched within: 3 working days
iBoot IO - Intelligent Power Switch
- Quick switching of external devices on/off based on alerts or monitoring conditions.
- Compatibility with Room Alert monitors and Relay Switch sensors.
- No need for modification of the power cord of the connected device.
- Automatic power management for AC devices up to 12A at 105-125VAC.
Availability: on special request
Dispatched within: On request
Industrial RFID reader supporting the Modbus RTU protocol, dedicated to PLC
RFID IND Modbus is an industrial RFID reader that has an RS485 port (Modbus RTU), a USB port (intended for configuration), two digital inputs and two relay outputs.
Availability: Available
Dispatched within: 3 working days
LANTICK PE-0-16 Smart digital inputs module via LAN
A device enables to control 16 dry contact / wet contact 12-24VDC inputs.
Built-in switch that allows you to connect additional LAN modules.
The device enables to control a LAN relay (Lantick with outputs or Nano Out) as a remote relay extension.
Availability: Available
Dispatched within: 3 working days
LANTICK PE-0-8 Eight counter inputs (opto-isolated) managed by the LAN (Internet)
The module can read status of inputs via LAN / WAN.
User can upload its own background image to the www server of the device and overlay input status over it.
Power supply
- Passive PoE 10V – 24V DC
- DC: 10 V - 24V
- Power consumption: max 2,5W
Ports
- LAN – Ethernet 1x10Mbps, RJ45
- RS485 - optional
Availability: Available
Dispatched within: 3 working days
LANTICK PE-16-0 smart module of 16 transistor digital outputs.
Lantick PE-0-16 is a smart module of 16 opto-isolated dry contact and 10-24VDC wet contact inputs. Input status is available via LAN. Additionally, the inputs status change can be transmited to the server or to another module in M2M communication. The inputs are NO (normally open) type, however the software allows to change the type to NC (normally closed). In addition, the inputs can operate in pulse counting mode.
Availability: Available
Dispatched within: 3 working days
LANTICK PE-2-2 Control of electrical devices by web
Lantick PE-2-2 has 2 relay outputs and 2 opto-isolated inputs (wet contact). Inputs and ouputs status is available via LAN / WAN with supported protocols (shown below). The device has built-in website. The main tab shows status of inputs / outputs, assigned name and indicator allowing to output control.
Availability: Available
Dispatched within: 3 working days
