Categories
Vendor
Configuration
Price
-
from
to
Nano Temp — Real-Time Temperature Monitoring Module
- Power: Passive PoE 12-24V DC, PoE adapter included, power consumption 1.5W
- Bus: 1-Wire, 2-wire cable
- Sensor type: DS18B20
- Measuring range: from -55°C to 120°C
- Communication: LAN, 10Mbps Ethernet port, RJ45
- Protocols: Modbus TCP, HTTP GET, TCP, UDP, SNMP, MQTT
Availability: Available
Dispatched within: 3 working days
THT2 - hygrometer and thermometer with RS485, electronics
- Function: electronics for digital temperature and humidity sensors with dew point calculation
- Interface: RS485
- Design: metal housing with an external sensor (sensor not included in the kit)
- Connection range: up to 1.2 km
- Compatible sensors: temperature and humidity or temperature only
- PC software: Wix
Availability: Available
Dispatched within: 3 working days
TQS4 I - indoor thermometer with RS485
- Function: digital thermometer, indoor version
- Measuring range: -40°C to +125°C
- Supply voltage: up to 36 V
- Housing: with ventilation openings
- Interface: RS485
- Protocols: Modbus RTU or Spinel
Availability: Available
Dispatched within: 3 working days
TQS4 O - outdoor thermometer with RS485
- Function: digital thermometer, outdoor version
- Measuring range: -40°C to +125°C
- Protection rating: IP65
- Supply voltage: up to 36 V
- Interface: RS485
- Protocols: Modbus RTU or Spinel
- Software: Modbus Configurator for switching the protocol and parameters
Availability: Available
Dispatched within: 3 working days
PAPAGO 2TH WIFI - 2x temperature, humidity and dew point measurement with WiFi
- Function: two connected temperature/humidity sensors with a WiFi interface
- Measured quantities: temperature, or temperature, humidity and dew point
- Temperature range: up to -55 to +125°C
- Measurement frequency: 1, 2 or 5 times per second
- Antenna connector: SMA RP
- Supply voltage: wide range 11 to 58 V DC
- Kit contents: PAPAGO 2TH WIFI, small antenna, mini USB cable, 15 V/0.8 A power adapter
Availability: Available
Dispatched within: 3 working days
THT2 I - indoor hygrometer and thermometer with RS485
- Function: temperature and humidity sensor with dew point calculation
- Interface: RS485
- Design: plastic housing with ventilation openings, for indoor use
- Mounting: on a wall or ceiling
- PC software: Wix
- Connection to PC: via any converter to RS485 (e.g. RS232→RS485, USB→RS485, Ethernet→RS485)
Availability: Available
Dispatched within: 3 working days
Collection Microclimate Kit — Building, 4 Points with PCA Calibration
- Coverage: 4 measuring points
- Data loggers: 4 × EnviSensor ETH with T/RH sensors
- Parameters: temperature, humidity, water leak
- Calibration: 4 × PCA certificate (T+RH) included
- Recording: continuous, independent for each room
- Local operation: web interface, JSON/XML, SNMP Get
Availability: no information
Dispatched within: 3 working days
