Categories
Bundle
Wybierz wariant
Range
Power supply
Standard
Configuration
Czujnik w zestawie
Uchwyt montażowy
Certyfikat PCA
Interfejs
Price
-
from
to
Temperature measuring systems (temperature and humidity sensors, controllers and many more)
Temperature monitoring is the basic parameter which should be systematically checked in such environments as e.g. server room, warehouse or cold store. Too high or too low temperature may negatively affect correct operation of equipment used in server rooms and IT environment, the products stored in a warehouse, or vaccines and food kept in cold stores.
Temperature monitoring allows maintaining adequate control and reducing to minimum the risks through the alarms being sent by monitoring units. It is an essential system allowing you to keep continuous control over a given room, acting quickly and easily. While using it you will be able to avoid various breakdowns or to respond immediately at the very moment they occur. Actions of this sort will undoubtedly minimise any losses occurring in rooms where monitoring equipment is installed.
The wide range of products we offer includes original temperature controlling devices from Avtech, Ferguson, Inveo, Papouch and Vutlan. In our shop you will find e.g.: communication and information infrastructure controller - 19’’ rack VT960, IT infrastructure monitoring unit VT900, temperature and humidity monitoring unit Ethernet TME Multi, thermometer IP NANO TEMP PoE, temperature and humidity sensor RS485, power strip and many other devices which can be installed in your server room.
Temperature monitoring
Temperature monitoring is not only the most important thing that need to be checked in previously mentioned rooms: server rooms, warehouses, or even cold stores. We should remember that an adequate temperature monitoring system also guarantees longer service life of equipment and its better performance.
Temperature monitoring system should consist of thermometers with data recording devices and software. The system monitoring temperature and other climate parameters should be fully automated. Measuring equipment, thermometers, hygrometers and data recorders can communicate with PC software via an existing Ethernet network, using wireless data transfer or dedicated wiring.
These solutions allow faster data transfers and recording. Moreover, they make it possible to react faster in case of any breakdown. Thus, these devices should be installed in each server room, warehouse or cold store.
EnviSensor ETH: Internet climate data logger with temperature sensor and management software
- Applications: Simple server room environmental monitoring — plug it in and get measurements, no configuration needed
- Operation: Locally on your LAN or via the CE MonitorApp cloud — you choose
- Interface: Ethernet
- Data view: built-in web page with JSON/XML (HTTP GET) and SNMP (read) — Zabbix, reports, BMS
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
- Sensors: Temperature, humidity, leak/flood, smoke, door opening
Availability: Available
Dispatched within: 24 hours
4x EnviSensor ETH Bundle: Kit of climate data loggers with temperature sensor and management software
- Operation: Locally on your LAN or via the CE MonitorApp cloud — you choose
- Kit: 4x EnviSensor ETH data logger + 4x temperature sensor
- Interface: Ethernet
- Data view: built-in web page with JSON/XML (HTTP GET) and SNMP (read) — Zabbix, reports, BMS
- Alarms: E-mail from the devices; SMS/push in paid CE MonitorApp plans
Availability: Available
Dispatched within: 24 hours
EnviSensor ETH PoE: PoE-powered climate data logger with temperature sensor and management software
- Operation: Locally on your LAN or via the CE MonitorApp cloud — you choose
- Interface: Ethernet, PoE power
- Data view: built-in web page with JSON/XML (HTTP GET) and SNMP (read) — Zabbix, reports, BMS
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
- Sensors: Temperature, humidity, leak/flood, smoke, door opening
Availability: Available
Dispatched within: 5 working days
EnviSensor LoRa: wireless internet data logger for radio sensors
- Operation: Locally on your LAN/WiFi network or via the CE MonitorApp cloud — you choose
- Interface: Ethernet or WiFi (uplink), LoRa to the sensors
- Data view: built-in web page with JSON/XML (HTTP GET) and SNMP (read)
- LoRa range: up to 1 km in open space, up to 32 sensors
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
Availability: Available
Dispatched within: up to 21 days
EnviSensor Mini ETH T: LAN climate data logger with temperature sensor
- Operation: Locally on your LAN or via the CE MonitorApp cloud — you choose
- Interface: Ethernet 10/100
- Data view: built-in web page with JSON/XML (HTTP GET) and SNMP (read)
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
- Sensors: Temperature, 3 m waterproof probe
Availability: Available
Dispatched within: 5 working days
EnviSensor Mini WiFi T: wireless climate conditions data logger with temperature sensor
- Operation: Locally on your WiFi network or via the CE MonitorApp cloud — you choose
- Interface: WiFi 2.4 GHz (IEEE 802.11 b/g/n)
- Data view: built-in web page with JSON/XML (HTTP GET) and SNMP (read)
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
- Sensors: Temperature, 3 m waterproof probe
Availability: Available
Dispatched within: 5 working days
EnviSensor RS Gate: RS485 Ethernet gateway for sensors with Cloud software
- Operation: Locally on your LAN or via the CE MonitorApp cloud — you choose
- Interface: Ethernet + RS-485 (up to 31 sensors, bus length up to 1200 m)
- Data view: HTTP GET/XML, Modbus TCP, SNMP (read) — Zabbix, BMS
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
- Sensors: Temperature, humidity — via the RS-485 bus
Availability: Available
Dispatched within: 48 hours
