Categories
Vendor
Configuration
Power supply
Range
Interface
Wariant
Interface
Price
-
from
to
GNOME485 - Ethernet to RS485 converter (galvanic isolation, 5 V DC power)
- Function: Ethernet to RS485 bus conversion
- Application: connecting an RS485 device to a LAN or extending an RS485 line over Ethernet
- Power: 5–30 V DC, without galvanic isolation
- Signals: RxTx+, RxTx- (A, B)
- Additionally: optional virtual serial port
Availability: Available
Dispatched within: 3 working days
GPSETH - GPS and NTP server for networks (3 m cable)
- Function: GPS/GLONASS receiver with Ethernet operating as an NTP server or GPS server
- Supported systems: GPS and GLONASS
- New: support for communication via the NMEA-183 protocol
- Data: speed, position and other parameters stored in memory accessible over the network
- Antenna: with a 3 m cable (a version with a 5 m cable is also available)
Availability: Available
Dispatched within: 3 working days
GPSETH - GPS and NTP server for networks (5 m cable)
- Function: GPS/GLONASS receiver with Ethernet operating as an NTP server or GPS server
- Supported systems: GPS and GLONASS
- New: support for communication via the NMEA-183 protocol
- Data: speed, position and other parameters stored in memory accessible over the network
- Antenna: with a 3 m cable (a version with a 5 m cable is also available)
Availability: Available
Dispatched within: 3 working days
GPSRS - accurate GPS time via RS232/RS485
- Function: GPS receiver providing accurate time and position via RS232 or RS485
- Data provided: date and time, latitude and longitude, altitude above sea level, speed, heading, HDOP, VDOP, PDOP, satellite numbers, data on visible satellites
- Advantage: keeps accurate time in its own internal clock even during a temporary loss of signal
Availability: Available
Dispatched within: 3 working days
HART - HART interface converter (Ethernet)
- Function: HART interface to RS485 (Modbus RTU) or Ethernet (HART ETH version) converter
- HART communication: bidirectional, with power supplied over two wires
- Application: integrating HART measuring devices with RS485/Modbus or Ethernet systems
Availability: Available
Dispatched within: 3 working days
HART - HART interface converter (RS485)
- Function: HART interface to RS485 (Modbus RTU) or Ethernet (HART ETH version) converter
- HART communication: bidirectional, with power supplied over two wires
- Application: integrating HART measuring devices with RS485/Modbus or Ethernet systems
Availability: Available
Dispatched within: 3 working days
IncRS232 - RS232 for incremental sensor (24 V DC power supply)
- Function: counting pulses from an incremental sensor (encoder)
- Interface: RS232 (IncRS232 variant) or RS485 (IncRS485 variant)
- Application: wherever precise position or rotation information is needed
- Sensor power output: 5 V/max. 200 mA, short-circuit proof, fuse-protected
- Input voltage variants: 5 V or 24 V
Availability: Available
Dispatched within: 3 working days
