Categories
Vendor
Configuration
Power supply
Range
Interface
Wariant
Interface
Price
-
from
to
GNOME232 - Ethernet to RS232 converter (standard power supply)
- Function: Ethernet to RS232 serial port conversion
- Power: 5–30 V DC, without galvanic isolation
- Signals: RXD, TXD, RTS, CTS, DTR, GND
- TruPort: remote control of speed, parity and other serial port parameters via the NVT protocol
Availability: Available
Dispatched within: 3 working days
GNOME422 - Ethernet to RS422 converter (without galvanic isolation)
- Function: Ethernet to RS422 bus conversion
- Applications: connecting an RS422 device to a LAN, extending a line or building an RS422 network over Ethernet
- Power: 5–30 V DC
- Signals: Rx+, Rx-, Tx+, Tx-
Availability: Available
Dispatched within: 3 working days
GNOME485 - Ethernet to RS485 converter (without galvanic isolation)
- Function: Ethernet to RS485 bus conversion
- Applications: connecting an RS485 device to a LAN or extending an RS485 line over Ethernet
- Power: 5–30 V DC, without galvanic isolation
- Signals: RxTx+, RxTx- (A, B)
- Additionally: optional virtual serial port
Availability: Available
Dispatched within: 3 working days
GNOME485 Ethernet-RS485 converter (isolated version)
- Ethernet-RS485 Conversion: Allows easy connection of an RS485 device to Ethernet.
- Virtual COM Port: Software that creates a new serial port in Windows.
- Galvanic Isolation: Yes
- Protocol Support: TCP/IP and UDP support for broad compatibility.
Availability: Available
Dispatched within: 3 working days
Nano Analog Input — Current and Voltage Signal Measurement Module
- Power: PoE IEEE 802.3af or 12-24V DC screw terminal, power consumption 1.5W
- Supported sensor types: voltage 0-5V/0-10V, current 0-20mA/4-20mA
- Analog input: measurement frequency 4Hz, resolution 17 bit
- Current parameters: range 0-20mA or 4-20mA, error <0.8%
- Voltage parameters: range 0-5V or 0-10V, error <0.5%
- Communication: LAN Ethernet 10Mbps RJ45; RS485 Modbus RTU
- Protocols: Modbus TCP, Modbus RTU, HTTP GET, TCP, SNMP, MQTT
Availability: Available
Dispatched within: 3 working days
Wie232 - Wiegand to RS232 converter
- Function: conversion of the Wiegand interface to an RS232 serial port
- Data output: card number as ASCII text or a binary number
- Supported formats: Wiegand 26, 30, 32, 34, 40, 42
- Communication protocols: Spinel, Modbus RTU
- Reader power: power output on the module (one power adapter for both Wie232 and the reader)
- Generation mode: can emulate a Wiegand reader
- Applications: integrating proximity card readers with a PC or another system
Availability: Available
Dispatched within: 3 working days
Wie485 - Wiegand to RS485 converter
- Function: conversion of the Wiegand interface to the RS485 industrial bus
- Data output: card number as ASCII text or a binary number
- Communication protocols: Spinel, Modbus RTU
- Applications: integrating proximity card readers with a master system over RS485
Availability: Available
Dispatched within: 3 working days
