Categories
Configuration
Wybierz wariant
Choose variant
Bundle
Range
Czujnik w zestawie
Uchwyt montażowy
Certyfikat PCA
Interfejs
Price
-
from
to
WebSensor U — 3-wire cable, 10 m — 0-10V Voltage Measurement Sensor
- Function: 0-10V voltage sensor
- Communication: 2x RJ12 bus connectors or a detachable connector (3-wire cable)
- Power: supplied from the bus of the master device (Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor)
- Cable: 3-wire, length 10 m
- Compatibility: Inveo modules: Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor (depending on the version)
Availability: Available
Dispatched within: 3 working days
WebSensor U — 3-wire cable, 5 m — 0-10V Voltage Measurement Sensor
- Function: 0-10V voltage sensor
- Communication: 2x RJ12 bus connectors or a detachable connector (3-wire cable)
- Power: supplied from the bus of the master device (Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor)
- Cable: 3-wire, length 5 m
- Compatibility: Inveo modules: Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor (depending on the version)
Availability: Available
Dispatched within: 3 working days
WebSensor U — RJ12 cable (flat), 1 m — 0-10V Voltage Measurement Sensor
- Function: 0-10V voltage sensor
- Communication: 2x RJ12 bus connectors or a detachable connector (3-wire cable)
- Power: supplied from the bus of the master device (Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor)
- Cable: RJ12 (flat), length 1 m
- Compatibility: Inveo modules: Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor (depending on the version)
Availability: Available
Dispatched within: 3 working days
WebSensor U — RJ12 cable (flat), 10 m — 0-10V Voltage Measurement Sensor
- Function: 0-10V voltage sensor
- Communication: 2x RJ12 bus connectors or a detachable connector (3-wire cable)
- Power: supplied from the bus of the master device (Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor)
- Cable: RJ12 (flat), length 10 m
- Compatibility: Inveo modules: Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor (depending on the version)
Availability: Available
Dispatched within: 3 working days
WebSensor U — RJ12 cable (flat), 5 m — 0-10V Voltage Measurement Sensor
- Function: 0-10V voltage sensor
- Communication: 2x RJ12 bus connectors or a detachable connector (3-wire cable)
- Power: supplied from the bus of the master device (Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor)
- Cable: RJ12 (flat), length 5 m
- Compatibility: Inveo modules: Virtus, Daxi, IQIO PRO/Sens, Hero Web Sensor (depending on the version)
Availability: Available
Dispatched within: 3 working days
WiFi antenna 2.15dB
- Type: rod antenna
- Band: 2.4 GHz
- Gain: 2.15 dB
- Length: 108 mm
- Connector: R-SMA
- Additionally: swivel joint for easier antenna positioning
Availability: Available
Dispatched within: 3 working days
WLC10 Water Leak Detection Cable — Sensing Cable for Water Leak Detection, 10 m
- Section length: 10 m
- Operating principle: linear detection — along the entire length of the cable
- Cable diameter: 6.5 mm
- Detected liquids: clean, contaminated and distilled water, acids, alkalis, alcohols
- Maximum detection run length: 100 m
- Required sensor: VT591 or VT594 (ordered separately)
- Mounting: standard and metal surfaces, except mesh floors
- Manufacturer: Vutlan (EU)
Availability: Available
Dispatched within: 3 working days
