DS18B20 temperature sensor WebSensor-T
- Sensor Type: WebSensor T (for temperature measurement)
- Housing: Designed for wall mounting or mounting in a 19-inch cabinet
- Expansion Ports: 2 x RJ12
- Connection to the 1-wire Bus: With a 2-wire cable (Hero, Nano Temp, Nano Temperature Sensor) or an RJ12 connector (Depmon, OW Explorer)
Availability: Available
Dispatched within: 3 working days
Hero Web + DS18B20 WebSensor-T temperature sensor with management software for 12 months
Availability: Available
Dispatched within: 3 working days
IQIO PRO — Advanced Monitoring Controller with Wi-Fi or LAN
- Power: PoE IEEE 802.3af (option), DC 12-24V or USB C 5V, power consumption 1.5W
- Bus: 3-wire cable or flat RJ12 cable with adapter, up to 6 sensors
- Input: 1 digital, pre-biased, normally open
- Output: 1 NO relay, max 30V DC, max 1A
- Communication: Ethernet 10/100Mbps RJ45 (option) or Wi-Fi
- Protocols: HTTP(s), MQTT(s), Modbus TCP, SNMP v2c/v3
Availability: Available
Dispatched within: 3 working days
IQIO Sens — Compact Monitoring Controller with Wi-Fi or LAN
- Power: PoE IEEE 802.3af (option), DC 12-24V or USB C 5V, power consumption 1.5W
- Bus: 3-wire cable or flat RJ12 cable with adapter, up to 2 sensors
- Communication: Ethernet 10/100Mbps RJ45 (ETH) or Wi-Fi
- Protocols: HTTP(s), HTTP GET, HTTP Server, MQTT(s), TCP
Availability: Available
Dispatched within: 3 working days
Lantick PE-0-1 — Miniature Single-Input Monitoring Module
- Power: Passive PoE 12-24V DC, PoE adapter included, max. power consumption 1.5W
- Number of inputs: 1
- Input type: dry contact, NO
- Communication: LAN, 10Mbps Ethernet port, RJ45
- Protocols: HTTP GET, Modbus TCP, SNMP, KNX/IP, TCP, UDP
- Dimensions: 74.6 x 50.1 x 27.0 mm
Availability: Available
Dispatched within: 3 working days
Lantick PE-0-16 — 16-Input Module with Built-in LAN Switch
- Power: 10-24V DC, PoE IEEE 802.3af (LAN1) or Passive PoE 10-24V DC (LAN2), max. consumption 2W
- Number of inputs: 16
- Input type: galvanically isolated, voltage/dry contact, NO
- Maximum input voltage: 24V
- Communication: 2 x LAN Ethernet 10/100Mbps, RJ45, built-in switch
- Protocols: HTTP GET, Modbus TCP, SNMP, KNX/IP, TCP, UDP
- Dimensions: 104.8 x 90 x 67.5 mm
Availability: Available
Dispatched within: 3 working days
Lantick PE-0-8 — 8-Input Module for Monitoring States via LAN
- Power: Passive PoE 10-24V DC or DC 10-24V, max. power consumption 2.5W
- Number of inputs: 8
- Input type: optocoupler, input voltage 10-24V
- Maximum input frequency: 1000 Hz
- Maximum counter value: 4,294,967,296
- Communication: LAN, 10Mbps Ethernet port, RJ45
- Protocols: HTTP GET, Modbus TCP, SNMP, KNX/IP, TCP, UDP
Availability: Available
Dispatched within: 3 working days
