Categories
Wybierz wariant
Wybierz wariant
Wybierz wariant
Price
-
from
to
MEDIA CONVERTER LAN-RS485
The converter allows you to connect devices with RS485 interface to a PC via LAN TCP / IP.
Availability: Dostępny
Dispatched within: 3 working days
Smart PDU Netio PowerPDU 4C: IEC-320 C13
- NETIO PowerPDU 4C is a small 110/230V PDU (Power Distribution Unit).
- Each of the four IEC-320 C13 sockets can be independently controlled (Turn On/Turn Off/Reset/Switch).
- Electric parameters (A, W, kWh, TPF, V, Hz) are measured with high accuracy on each output.
- Two LAN ports (and a built-in Ethernet switch) for connection to LAN.
- The NETIO Cloud service, provided for a fee, utilizes SSL security and servers in Europe.
Availability: no stock
Advanced Power Distribution Unit (PDU) Netio PowerPDU 8QS: 8x IEC-320 C13
- NETIO PowerPDU 8QS is a PDU (Power Distribution Unit) with eight power outlets (8x IEC-320 C13) controlled and measured via LAN
- Fits into a 19” rack (1U)
- Each outlet can be individually turned on/off
- PowerPDU 8QS supports two channels for electrical measurements: PDU as a whole (all outlets together) and the first outlet separately (All outlets + 1)
- The digital input (DI) can be used for outlet control or counting S0 pulses (electric energy meter output)
Availability: low quantity
Dispatched within: 3 working days
Intelligent power cable with electrical parameter measurement Netio PowerCable REST
- Maximum load: 16A at 110/230V voltage
- Measurement of electrical parameters: Current [A], Power [W], Energy [Wh], True Power Factor, Voltage [V], Grid Frequency [Hz], Phase [°], Reverse Energy [Wh]
- Measurement accuracy: better than 1%
- Connection: WiFi with internal antenna
- Support for open API protocols: Modbus/TCP, MQTT, SNMP, Telnet, and others
Availability: no stock
iBoot G2S - Intelligent Power Management System
- Instant reboot of external devices based on Room Alert alerts.
- Automatic reboots based on power status or network connectivity.
- Built-in 10/100 switch for easy connection in hard-to-reach locations.
- Support for 105 - 240 VAC voltage with automatic range selection.
Availability: on special request
Dispatched within: On request
Intelligent PDU with 4 metered and switched outputs (4x IEC-320 C13) and 1x DI (digital input) PowerPDU 4KS.
- Input Voltage: 110/230V
- Outputs: 4 x IEC-320 C13 sockets
- Electricity Measurement: Yes, with accuracy up to 1%
- M2M Protocols: Modbus/TCP, MQTT, SNMP, Telnet, and others
- DI (Digital Input): 1 input, capable of controlling outputs or counting S0 impulses
- Mounting: Horizontal, vertical, or as a 1U device in a rack cabinet
- ZCS (Zero Current Switching): Supported, minimizes voltage spikes and prolongs device lifespan
Availability: Dostępny
Dispatched within: 48 hours
Intelligent power distribution unit (PDU) with socket switching: Netio PowerPDU 4PS - IEC-320 C13.
- Input Voltage: 110/230V
- Outputs: 4 x IEC-320 C13 sockets
- Electrical Measurement: None (however, individual switching on/off is possible)
- M2M Protocols: JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet, and others
- Mounting: Horizontal, vertical, or as a 1U device in a rack cabinet
Availability: Ostatnie sztuki
Dispatched within: 5 working days
Intelligent power strip with socket switching and OPEN API Netio PowerBOX 3Px
- Number of outputs: 3
- Supported API protocols: JSON, Modbus/TCP, SNMP, MQTT-flex, Telnet
- Operating temperature range: -20°C to +65°C
- Software update over the internet: Yes
- Relay switching at zero voltage: Yes
Availability: no stock
Mounting Brackets for 19" 1U Rack Cabinet: NETIO RM1 4C for PowerPDU 4C/4KS/4PS
- Accessory Type: Mounting Brackets for 19" 1U Rack Cabinet
- Compatibility: PowerPDU 4C, PowerPDU 4KS, or PowerPDU 4PS devices
- Material: Metal
- Dimensions: Suitable for mounting in standard 19" 1U rack cabinets
- Included: M6 screws for device mounting
Availability: Dostępny
Dispatched within: 3 working days
NETIO PowerDIN 4PZ - Energy Meter with Two Channels, 110-230V Voltage, and 16A Max Current
- 2-channel current meter 110-230V/Max 16A with relays on outputs and LAN (Ethernet) or WiFi connectivity.
- Two measured outputs 110/230VAC can be turned off using the built-in relay.
- The other two outputs have NO/NC relay contacts.
- Two digital inputs can be used to connect buttons or S0 meters.
Availability: Dostępny
Dispatched within: 24 hours
Power Management
The "Power Management" category is a key element of the efficient operation of IT, telecommunications, and other industries that require uninterrupted access to power. Our power supplies and accessories provide not only energy stability, but also enable effective monitoring and management of energy consumption, which translates into savings and optimization of device operation.