Multi-Point RS485 Monitoring Kit — EnviSensor RS Gate
Regular price:
Regular price:
・Kup teraz i zapłać za 30 dni
product unavailable
Bundled products
To add bundle to the basket, select all the required variants of each item.
EnviSensor RS Gate: RS485 Ethernet gateway for sensors with Cloud software
see gallery (20)
Vendor: EnviSensor
Quantity in bundle: 1 pcs
The price of product outside the bundle €171.89
Cheaper in the bundle!- Operation: Locally on your LAN or via the CE MonitorApp cloud — you choose
- Interface: Ethernet + RS-485 (up to 31 sensors, bus length up to 1200 m)
- Data view: HTTP GET/XML, Modbus TCP, SNMP (read) — Zabbix, BMS
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
- Sensors: Temperature, humidity — via the RS-485 bus
THT2 I - indoor hygrometer and thermometer with RS485
see gallery (9)
Vendor: Papouch
Quantity in bundle: 2 pcs
The price of product outside the bundle €110.47
Cheaper in the bundle!- Function: temperature and humidity sensor with dew point calculation
- Interface: RS485
- Design: plastic housing with ventilation openings, for indoor use
- Mounting: on a wall or ceiling
- PC software: Wix
- Connection to PC: via any converter to RS485 (e.g. RS232→RS485, USB→RS485, Ethernet→RS485)
TQS4 E - thermometer electronics with RS485
see gallery (7)
Vendor: Papouch
Quantity in bundle: 1 pcs
The price of product outside the bundle €44.92
Cheaper in the bundle!- Function: thermometer electronics for building into other equipment
- Measuring range: -40°C to +125°C
- Supply voltage: up to 36 V
- Interface: RS485
- Protocols: Modbus RTU or Spinel
- Software: Modbus Configurator for switching the protocol and parameters
Multi-point monitoring on an RS485 bus — EnviSensor gateway, local operation
The kit handles three measuring points on a single RS485 bus, connected through the Polish-made EnviSensor RS Gate. It works fully locally: web panel, JSON/XML readout via HTTP GET, SNMP Get. The CE MonitorApp cloud is included in the kit, but optional.
Three operating modes — you choose
1. Locally, without the cloud
The EnviSensor RS Gate exposes all sensors on the bus on a built-in web page on your LAN. You can retrieve the data via HTTP GET (JSON/XML) and SNMP Get. E-mail alarms are sent directly from the device — no account needed.
2. On-premise with a monitoring system
Ready-made Zabbix templates — integration in 15 minutes. If you have your own system, you can also read the bus directly using the Modbus RTU protocol.
3. CE MonitorApp cloud — included, but optional
The CE MonitorApp cloud is included in the kit — Free access with no time limit and no fees. It adds real value when you need access from outside your local network or several locations in one dashboard. But using it is entirely optional: you don't log in, you don't create an account and you lose nothing — the devices work locally just the same. One device, two paths — you choose at any time and can change your mind. SMS notifications and longer history are available in optional paid plans (from PLN 180 net/year).
No cloud? This kit works 100% on your network
You don't need to create an account, register devices or allow any outbound traffic. Configuration, data view and alarms all work locally: a built-in web panel on your LAN, data readout via HTTP GET (JSON/XML) and SNMP Get, and e-mail alarms sent directly from the device. If your IT department does not allow cloud solutions — this kit meets that requirement without compromise.
Integration with your software
You can retrieve data directly from the devices via HTTP GET (JSON/XML) and via SNMP (read) — for your own reports, documentation and Zabbix/BMS/SCADA systems, without going through the cloud.
| Gateway | EnviSensor RS Gate — Ethernet 10/100 (DHCP) |
| Bus | RS485 — multiple sensors on a single line |
| Alarms | E-mail from the device · SMS/Push via CE MonitorApp (optional) |
| Data view | web page · JSON/XML (HTTP GET) · SNMP Get |
| Warranty | 60 months |
| Made in | Poland |
Specification
Gateway: EnviSensor RS Gate, Ethernet 10/100, DHCP
Sensors: 2× THT2 (temperature + humidity), 1× TQS4 (temperature)
Bus: RS485 — expansion without new cabling
Data view: web page, JSON/XML (HTTP GET)
SNMP: read (Get)
Cloud: CE MonitorApp — included, optional
Kit contents
EnviSensor RS Gate — RS485/Ethernet gateway with software × 1
Papouch THT2 — RS485 hygrometer and thermometer × 2
Papouch TQS4 — RS485 thermometer × 1
CE MonitorApp — included, optional
Expansion without new cabling
Once you have more than a few measuring points, a separate data logger for each one stops making economic sense. The RS485 bus lets you add more sensors to the same line — the cost of expansion is just the sensor, and you still need only one gateway.
Example applications
Server room, building, multiple measuring points.
Pre-shipment configuration
You can order the kit with alarm thresholds and addressing preconfigured for your network — just take it out of the box and plug it in. We provide remote assistance with the first start-up. Also available for rent (MaaS) with monthly billing.
Shipping costs
The price does not include any possible payment costs
Related products
Net price: €143.47
Net price: €128.57
Net price: €165.83
Net price: €181.67
Net price: €139.75
Net price: €128.57
Net price: €352.16
Net price: €750.90
Net price: €462.84
Net price: €68.76
Net price: €90.37
Net price: €68.76
Sprawdź także:
