Server room monitoring
Server room monitoring that works from the very first start-up
A cooling failure at 3 a.m. won't wait until morning. We supply temperature, humidity, flood and power monitoring configured before shipping — alarm thresholds, SMS/email recipients and reports work from the moment you plug it in.
15 years in the field · 2,000+ companies · 30-day free trial · remote technical support
Server room parameters: not just temperature
What conditions should a server room maintain?
Common practice for server rooms is 18–27°C and 45–60% RH. What matters more than the value itself is who finds out about an excursion, and how many minutes later. Our systems send an SMS and email alarm within 30 seconds of a threshold being crossed.
How it works
Selection — you describe your server room, we propose a kit and a quote within 24 hours.
Pre-shipment configuration — we set network addressing, thresholds, alarm recipients and reports. You connect power and the network — that's it.
24/7 monitoring — readings in CE MonitorApp (cloud) or in local software on your own server, with no data leaving your network.
Three ready-made setups with prices
Server Room Monitoring Kit — Start
small server room, basic monitoring
from EUR 181 net (excl. VAT)
View product →Server Room Monitoring Kit — Rack Pro
full cabinet protection: temperature, flood, smoke, door
EUR 507 net (excl. VAT)
View product →Hybrid Kit — Vutlan VT825 + EnviSensor
server room + distribution points in branch offices
EUR 751 net (excl. VAT)
View product →What you won't get elsewhere
✓ The equipment arrives configured — you don't lose a day on manuals
✓ Cloud or on-premise — your data can stay on your network
✓ A 30-day free trial in your server room, with alarms sent to your phone
✓ SNMP integration with Zabbix/PRTG or other systems, to your exact requirements
FAQ
Which parameters should be monitored in a server room?
The minimum is temperature in the cabinet and in the room. Full protection also covers humidity, flooding, smoke, power loss and door opening — cooling failures and floods cause most of the damage in small server rooms.
Can an online thermometer work without the cloud?
Yes. Remote temperature monitoring over the internet can run in CE MonitorApp, or you install the local software on your own server — readings then never leave your network, and SMS/email alarms work exactly the same.
Where should a LAN temperature sensor go in a rack cabinet?
Typically: one sensor at the top of the cabinet (the warmest point), a second at the cold-air inlet, and a flood probe under the air-conditioning unit. When you order, we advise on placement for your layout.
I use Zabbix — will I see the readings there?
Yes, the devices expose readings over SNMP. We configure the OIDs before shipping.
Not sure what to choose?
Describe your site in 3 sentences — number of rooms, what you want to measure and what network is on site. We'll select the system and send a quote within 24 hours on business days.
