Radio Museum Kit — Gallery Temperature Monitoring without Drilling
Regular price:
Regular price:
・Kup teraz i zapłać za 30 dni
product unavailable
Bundled products
To add bundle to the basket, select all the required variants of each item.
TME Radio - wireless temperature and humidity meter (standard)
see gallery (17)
Vendor: Papouch
Quantity in bundle: 1 pcs
The price of product outside the bundle €202.37
Cheaper in the bundle!- Function: wireless measurement of up to 32 temperatures and humidity values
- Radio band: 868 MHz
- Range: up to 100 m
- Configuration: via the web interface, which also shows all measured values
- Kit contents: TME Radio electronics, power adapter, 1 m patch cord, antenna (depending on variant)
- External antenna mounting: Ø6 mm holes with 16 mm spacing, 72 mm from the wall
THW - indoor thermometer and hygrometer for TME Radio and TME Radio POE
see gallery (4)
Vendor: Papouch
Quantity in bundle: 2 pcs
The price of product outside the bundle €162.49
Cheaper in the bundle!- Function: digital wireless thermometer with hygrometer, indoor version
- Housing: with ventilation holes, designed for measuring indoor air temperature and humidity
- Measuring range: -40°C to +60°C
TMW I - indoor temperature sensor for TME Radio and TME Radio POE
see gallery (6)
Vendor: Papouch
Quantity in bundle: 1 pcs
The price of product outside the bundle €139.80
Cheaper in the bundle!- Function: digital wireless thermometer, indoor version
- Housing: with ventilation holes, for measuring indoor air temperature
- Measuring range: -40°C to +60°C
Museum climate monitoring — three wireless points, zero intervention in the walls
A kit for buildings where the conservator will not approve a single drill hole. Two THW wireless sensors keep an eye on temperature and humidity in the exhibition halls, the TMW I covers a display case or a small storeroom, and the TME Radio meter stays in the back room, connected to the network by cable. It works locally: web interface, XML, SNMP and Modbus TCP. No cloud and no subscription.
Three operating modes — you choose
1. Locally, without the cloud
The data logger presents all wireless sensors on its built-in web page on your LAN. Data in XML (HTTP GET), via SNMP and Modbus TCP; e-mail alarms and SNMP traps directly from the device. The 868 MHz radio transmission is local — nothing goes over the internet.
2. On-premise with a monitoring system
Readout via SNMP and HTTP GET into the institution's monitoring system — with no intermediary platform.
3. Remote access and the cloud — an optional extension
This kit does not need any cloud to work. If you want remote access to multiple locations, you can optionally add an EnviSensor data logger and the CE MonitorApp platform — it is a choice, not a requirement.
No cloud? This kit works 100% within your network
You don't need to create an account, register devices or let traffic out of your network. Configuration, data view and alarms all work locally: the built-in web interface on your LAN, data readout via HTTP GET (XML) and SNMP Get, and e-mail alarms sent directly from the device. If your IT department does not allow cloud solutions, this kit meets that requirement without compromise.
Integration with your software
You can retrieve data directly from the devices via HTTP GET (XML) and via SNMP (read) — for your own reports, documentation and Zabbix/BMS/SCADA systems, without going through the cloud.
| Data logger | TME Radio — Ethernet, web interface |
| Wireless sensors | 2× THW (temp+humidity) + TMW I (temperature) |
| Sensor mounting | no cables and no power supply — 3-5 year battery, removable without a trace |
| Data view | web page · XML (HTTP GET) · SNMP · Modbus TCP · cloud optional |
| Applications | exhibition halls, display cases, heritage buildings |
| Operation | 100% local |
Specification
-
Data logger: TME Radio, Ethernet, web interface on your LAN
-
2× THW: wireless indoor thermometer and hygrometer
-
TMW I: wireless indoor temperature sensor
-
Data view: web page, XML (HTTP GET), Modbus TCP
-
SNMP: read + alarm traps
-
Radio: 868 MHz, range up to 100 m line of sight, up to 32 sensors per system
-
Sensor power: internal battery, 3-5 years of operation
-
Variant: EnviSensor Radio + EnviSensor LoRa sensors — optionally with the CE MonitorApp platform
Kit contents
-
Papouch TME Radio — wireless temperature and humidity meter (data logger) × 1
-
Papouch THW — wireless indoor thermometer and hygrometer (exhibition hall) × 2
-
Papouch TMW I — wireless indoor temperature sensor (display case/storeroom) × 1
A climate record is a condition for loans
The standard for collections is usually 45-55% RH and a stable temperature — and humidity fluctuations damage wood, paper and canvas faster than the wrong humidity level itself. Without a continuous record there is no proof of conditions for the insurer or for the institution lending an exhibit: a single loan refused for lack of climate documentation costs more than the entire kit.
Example applications
Museum, gallery, exhibition halls, heritage building.
Pre-shipment configuration
You can order the kit with alarm thresholds and network addressing already configured for your network — just take it out of the box and plug it in. We provide remote help with the first start-up. Also available for rent (MaaS) with monthly billing.
