PowerDIN 4PZ — Dual 230V/16A energy meter with relay, DIN rail mounting

PowerDIN 4PZ is a dual 110/230V (max 16A) energy meter with a relay, mounted on a DIN rail. Outputs 1 and 2 measure power consumption and can be switched remotely, while outputs 3 and 4 are additional relay contacts for controlling other circuits. Two digital inputs with pulse counters let you read the state of a mechanical switch or count pulses from an external meter (e.g. water or energy).

WiFi configuration takes a minute thanks to NFC and the NETIO Mobile 2 app — just hold your phone close to the device. Control is via WEB, the NETIO Cloud or Open API (JSON, SNMP, Modbus/TCP, MQTT-flex and more).

Key parameters

• Outputs: 2x metered (110-230VAC/16A) + 2x relay (110-230VAC/2A, 48VDC/2A)
• Digital input (DI): 2x digital input + S0 pulse counter
• Energy metering: Yes, 2 channels (A, kWh, W, TPF, Hz, V)
• Network: LAN (RJ45) + WiFi (NFC configuration)
• Mounting: DIN rail (6 modules)
• Dimensions: 106 x 91 x 62 mm
• Switching: ZCS (Zero Current Switching, outputs 1-2)
• API: JSON, MQTT-flex, SNMP v1/v3, Modbus/TCP, XML, URL API, Telnet
• Cloud: NETIO Cloud (paid, free welcome credit)
• Warranty: 6 years

Basic features:

• 2 metered outputs: energy metering with accuracy better than 1%.
• 2 additional relay outputs: for controlling other circuits.
• 2 digital inputs with S0 pulse counter: for connecting external meters.
• LAN + WiFi with NFC configuration: quick setup without network cabling.
• DIN rail mounting (6 modules): installation in an electrical distribution board.
• Remote control: WEB, mobile app, NETIO Cloud or Open API.

Applications

PowerDIN 4PZ is well suited for monitoring energy consumption in industry, controlling AC charging of electric vehicles, and remotely metering and restarting circuits from a mobile app or the cloud.

For monitoring environmental conditions at the same location, consider EnviSensor — see our range of server room monitoring sensors.