CO2 and Climate Monitoring Kit — Warehouse / Hall
Regular price:
Regular price:
・Kup teraz i zapłać za 30 dni
product unavailable
Bundled products
To add bundle to the basket, select all the required variants of each item.
EnviSensor RS Gate: RS485 Ethernet gateway for sensors with Cloud software
see gallery (20)
Vendor: EnviSensor
Quantity in bundle: 1 pcs
The price of product outside the bundle €171.89
Cheaper in the bundle!- Operation: Locally on your LAN or via the CE MonitorApp cloud — you choose
- Interface: Ethernet + RS-485 (up to 31 sensors, bus length up to 1200 m)
- Data view: HTTP GET/XML, Modbus TCP, SNMP (read) — Zabbix, BMS
- Alarms: E-mail from the device; SMS/push in paid CE MonitorApp plans
- Sensors: Temperature, humidity — via the RS-485 bus
THCO2 - CO2 sensor, thermometer and hygrometer with RS485
see gallery (15)
Vendor: Papouch
Quantity in bundle: 1 pcs
The price of product outside the bundle €285.56
Cheaper in the bundle!- Function: CO2 concentration, temperature and humidity sensor
- Temperature range: -40 to +70°C
- CO2 range: 0 to 10,000 ppm
- Interface: RS485
- Protocols: Modbus RTU or Spinel
- Software: Modbus Configurator for switching the protocol and parameters
THT2 I - indoor hygrometer and thermometer with RS485
see gallery (9)
Vendor: Papouch
Quantity in bundle: 1 pcs
The price of product outside the bundle €110.47
Cheaper in the bundle!- Function: temperature and humidity sensor with dew point calculation
- Interface: RS485
- Design: plastic housing with ventilation openings, for indoor use
- Mounting: on a wall or ceiling
- PC software: Wix
- Connection to PC: via any converter to RS485 (e.g. RS232→RS485, USB→RS485, Ethernet→RS485)
CO2 and climate monitoring in a warehouse — EnviSensor gateway, local operation
The kit measures CO2 concentration in the work area as well as temperature and humidity at a second point. It is built around the Polish-made EnviSensor RS Gate: it makes data from the RS485 bus available locally via a web panel, JSON/XML and SNMP Get. The CE MonitorApp cloud is included in the kit, but optional.
Three operating modes — you choose
1. Locally, without the cloud
The gateway exposes both sensors on a built-in web page on your LAN. You can retrieve the data via HTTP GET (JSON/XML) or SNMP Get. A CO2 threshold alarm is sent by e-mail directly from the device — with no cloud account.
2. On-premise with a monitoring system
Ready-made Zabbix templates — integration in 15 minutes. If you have your own system, read data via SNMP Get or Modbus RTU directly from the bus.
3. CE MonitorApp cloud — included, but optional
The CE MonitorApp cloud is included in the kit — Free access with no time limit and no fees. It adds real value when you need access from outside your local network or several locations in one dashboard. But using it is entirely optional: you don't log in, you don't create an account and you lose nothing — the devices work locally just the same. One device, two paths — you choose at any time and can change your mind. SMS notifications and longer history are available in optional paid plans (from PLN 180 net/year).
No cloud? This kit works 100% on your network
You don't need to create an account, register devices or allow any outbound traffic. Configuration, data view and alarms all work locally: a built-in web panel on your LAN, data readout via HTTP GET (JSON/XML) and SNMP Get, and e-mail alarms sent directly from the device. If your IT department does not allow cloud solutions — this kit meets that requirement without compromise.
Integration with your software
You can retrieve data directly from the devices via HTTP GET (JSON/XML) and via SNMP (read) — for your own reports, documentation and Zabbix/BMS/SCADA systems, without going through the cloud.
| Gateway | EnviSensor RS Gate — Ethernet 10/100 (DHCP) |
| Bus | RS485 — expandable with additional sensors |
| Measured parameters | CO2, temperature, humidity — 2 points |
| Data view | web page · JSON/XML (HTTP GET) · SNMP Get · CE MonitorApp optional |
| Warranty | 60 months (RS Gate) |
| Made in | Poland |
Specification
Gateway: EnviSensor RS Gate, Ethernet 10/100, DHCP
CO2 sensor: THCO2 — CO2 + temperature + humidity, RS485
Climate sensor: THT2 — temperature + humidity, RS485
Data view: web page, JSON/XML (HTTP GET)
SNMP: read (Get)
Cloud: CE MonitorApp — included, optional
Kit contents
EnviSensor RS Gate — RS485/Ethernet gateway × 1
THCO2 — RS485 CO2 sensor, thermometer and hygrometer × 1
Papouch THT2 — RS485 hygrometer and thermometer × 1
CE MonitorApp — included, optional
CO2 in a hall is a health and safety issue, not a comfort one
Combustion-engine forklifts in a hall with poor ventilation raise CO2 concentration to a level at which operators make mistakes — and during a health and safety inspection, no measurement means no defense. The kit gives you a continuous record and a threshold alarm, and adding another point costs just the sensor.
Example applications
Warehouse, hall, forklift operating area.
Pre-shipment configuration
You can order the kit with alarm thresholds and addressing preconfigured for your network — just take it out of the box and plug it in. We provide remote assistance with the first start-up. Also available for rent (MaaS) with monthly billing.
