LANTICK PE-16-0 smart module of 16 transistor digital outputs.
Regular price:
Regular price:
product unavailable
LANTICK PE-16-0
Technical data
Power supply
- DC: 10-24VDC (Plug-in Screw Terminal 3.5mm),
- PoE: POE IEEE 802.3af via port 1,
- Passive PoE: 10-24VDC via port 2,
- Power consumption: max 2W.
Communication
- 2 Ethernet 10/100Mbps ports, built-in switch for connecting additional LAN devices,
- Ethernet 1 port: PoE 802.3af,
- Ethernet 2 port: Passive PoE 10-24VDC.
Outputs
- number of outputs: 16,
- output type: transistor,
- operating voltage: 5-28VDC,
- maximum current load: 1.7A per channel.
Communication protocols
Advanced software allows to communicate through:
- built-in website,
- KNX / IP protocol,
- HTTP protocol,
- Inveo Dashboard access service http://dash.inveo.com.pl,
- SNMP protocol,
- Modbus TCP protocol,
- Windows command line program,
- Linux command line program.
M2M connection
Inveo devices are designed in such way that they can work with each other. For example, Nano Temp can send alarm state to Lantick 4-4 and it causes activation of output No.2 (e.g. fan).
M2M feature support protocols:
- KNX,
- TCP protocol,
- UDP protocol,
- HTTP GET.
Device configuration
At the first start-up, it is necessary to configure the device. The easiest way to configure Inveo devices is to use a Discoverer application. After installing and launching the application, all Inveo devices connected to the network will appear in the table. If the device has not been found, select another Interface or check the connection to the router.
If the devices have the Enable Remote Config service disabled, it is necessary to change the settings manually by changing the computer’s IP address. The precise device configuration instruction can be found in the manual.
Safety
Shipping costs
The price does not include any possible payment costs
Nie ma jeszcze żadnych opinii, bądź pierwszy!
Wyświetlane są wszystkie opinie (pozytywne i negatywne). Weryfikujemy, czy pochodzą one od klientów, którzy kupili dany produkt.